Automatic Counting Packing Machine for Mixed Fasteners Connectors Hardware Kit with 2 Vibratory Feeders
This automatic fastener counting and bagging machine,is suitable for screws packaging,rivets packing,anchor bolts packaging, furniture connectors packaging.
Product Parameters
Machine Introduction
Automatic Mixed Fastener Counting Packaging Machine with Two Vibratory Feeders
Mixed parts of incorrect counting number or wrong mixing are automatically separated and recycled, and are not packed in o bags, which avoid film waste.
This counting packing machine is especially suitable for the packaging situation with very high accuracy requirements.
In case the sealing device clamps or the cutter cuts the objectives, any other parts of this bagging machine will not be damaged.
Automatically mixed packaging of a variety of small parts, greatly saving labor cost.
Vibratory feeder, easy to change.
Vibratory feeders need not be adjusted each time for different size and length of parts packed.
Set the required number of parts packed and package number on the 7-inch color touch screen, the machine can do packaging accurately.
Pneumatic pillow-pack bagging machine has the advantages of the small footprint, low noise.
Mitsubishi PLC control system is easy to use, stable and durable.
Minimal maintenance requirements.
Infrared optical counting system, faster and with high accuracy.
Intelligent temperature controller.
The machine stops automatically while vibratory feeder lacking in material.
Bag forming, filling, sealing and cutting is done in one time
Machine Video
Machine Applications
take-away conveyor
highly sensitive checkweighers
Sponge soundproof housing
Automatic labeler
Gas(Nitrogen) flush device
Tear notch device
Round or Euro hole punch device
Alarm light
Automated feeding system
Code printer
Pouch Types
This automatic fastener packing machine is suitable for screw packaging, mixed hardwre packaging in bags:
Hardware Parts: nuts bolts joint, nuts, bolts, screws, pins, steel nails, washers, rivets, fasteners, etc.
Rubber Parts/Plastic Parts: wall anchors, O-rings, pipe clips, rubber housing, molded parts, etc.
Furniture Hardware: furniture connectors, furniture fasteners, furniture fittings, furniture accessories, cabinet hardware, door hardware, lock hardware, hinge hardware.
Toys: small rubber toys, LEGO building bricks, dice, etc.
Foods & Pills: tablet capsule, effervescent tablet, milk tablet, jelly beans, sugar-coating tablet, non-sticky Candies, etc.
Others: kitchen hardware, bike hardware, computer hardware, electronic hardware parts, etc.
Machine Specifications
Model | YLM-260V2-CP |
Film | OPP/CPP锛孫PP/PE锛孋PP/PE |
Bag Length | max. 280mm(bag pulling twice) |
Bag Width | 70-150mm (forming device needs changing for different size) |
Film Width | max. 320 mm |
Packing Speed | 20-150 bag/min (according to characristics of parts packed, film, number of parts per bag |
Counting Method | Infrared optical counting system / track positioning |
Number of Parts per Bag | As long as the bag can accomodate |
Bag Type | pillow pack or three side sealed |
Sealing Width | 10 mm |
Bag Forming Device | pneumatic sealing and cutting |
Cutting Method | pattern welded knife |
Bag Length Control | setting on touch screen / photoelectric sensor |
Air Discharging Method | air hole |
Linking Bag | function of bag linking can be set on touch screen |
Air pressure | 0.4-0.8Mpa (air compressor prepared by customer) |
Voltage | 220V 50Hz or customized |
Power | 2.0 Kw |
Overall Size | Customized |