Automatic Cabinet Hardware Packaging Machine with 3 Vibratory Feeders
This automatic cabinet connectors hardware counting packing machine, is suitable for packing kitchen cabinet hardware, shoe cabinet connectors packing, wardrobe screw Kit in bag packaging.
Product Parameters
Machine Introduction
Automatic Cabinet Hardware Packaging Machine with 3 Vibratory Feeders
- Automatically mixed packaging of a variety of small parts, greatly saving labor cost.
- Vibratory feeders, easy to change.
- Vibratory feeders need not be adjusted each time for different size and length of parts packed.
- Set the required number of parts packed and package number on the 7-inch color touch screen, the machine can do packaging accurately.
- Pneumatic pillow-pack bagging machine has the advantages of the small footprint, low noise.
- Mitsubishi PLC control system is easy to use, stable and durable.
- Minimal maintenance requirements.
- Infrared optical counting system, faster and with high accuracy.
- Intelligent temperature controller.
- The machine stops automatically while vibratory feeder lacking in material.
- Bag forming, filling, sealing and cutting is done in one time.
Machine Video
Machine Applications
- Take-away conveyor
- Highly sensitive checkweighers
- Sponge soundproof housing
- Automatic labeler
- Gas(Nitrogen) flush device
- Tear notch device
- Round or Euro hole punch device
- Alarm light
- Automated feeding system
- Code printer
How to use the hardware counting bagging packing machine? Read this.
1. Plug in power and feed 6-8 kg air source; turn on the bagging machine to heat it (to the pre-designed bag sealing condition) ;
2. Pour the material-to-be-packed in o the vibratory feeders, start it and adjust the vibrating frequency;
3. Set the numbers of parts per bag on the touch screen, and then set the length of the bag according to this;
4. Turn on the code printing machine for heating, to automatic temperature control state; make sure that bag forming beautiful, and cursor positioning is good;
5. Set the production capacity, and press the start button.
Pouch Types
This automatic cabinet hardware counting packing machine is suitable for mixed packaging of several types of small parts or assembly kits in plastic bags:
- Hardware Parts: nuts bolts joint, nuts, bolts, screws, pins, steel nails, washers, rivets, fasteners, etc.
- Rubber Parts/Plastic Parts: wall anchors, O-rings, pipe clips, rubber housing, molded parts, etc.
- Furniture Hardware: furniture connectors, furniture fasteners, furniture fittings, furniture accessories, cabinet hardware, door hardware, lock hardware, hinge hardware.
- Toys: small rubber toys, LEGO building bricks, dice, etc.
- Foods & Pills: tablet capsule, effervescent tablet, milk tablet, jelly beans, sugar-coating tablet, non-sticky Candies, etc.
- Others: kitchen hardware, bike hardware, computer hardware, electronic hardware parts, etc.
Machine Specifications
Model | YLM-320V3-CP |
Film | OPP/CPP,OPP/PE,CPP/PE |
Bag Length | max. 280mm(bag pulling twice) |
Bag Width | 70-150mm (forming device needs changing for different size) |
Film Width | max. 320 mm |
Packing Speed | 3-50 bag/min (according to characristics of parts packed, film, number of parts per bag |
Counting Method | Infrared optical counting system / track positioning |
Quantity of Parts per Bag | As long as the bag can accomodate |
Bag Type | pillow pack or three side sealed |
Seam Width | 10 mm |
Bag Forming Device | trunk forming device, pneumatic sealing and cutting |
Cutting Method | pattern welded knife |
Bag Length Control | setting on touch screen / photoelectric sensor |
Air Discharging Method | air hole |
Linking Bag | function of bag linking can be set on touch screen |
Air pressure | 0.4-0.8Mpa (air compressor prepared by customer) |
Voltage | 220V 50Hz or customized |
Power | 2.0 Kw |
Overall Size | Customized |